INFODRAW MRS-400 Page 77 User Manual Download

Page: 77 / 194

July 14, 2013

INFODRAW MRS-400 User Manual v5.4.1

To view and play local recordings, open the

“Recordings”

tree on the left hand side of the

screen under

“My Monitor”

. The files are arranged by date. Choose the recorded file by

date, time, device- ID and channel name. Double click on the file to play it in the MRS
Monitor player.

Alternatively, to play recordings, locate and open the recordings folder on your PC/laptop.
The files are arranged by date. Select the desired recording. Open it in either the

MRS AV

Player Application

or in

VLC Player

After you enable the recording
action, the corresponding
message will appear at the top
of the video channel

(“M”)

This message means that local
recording has commenced
successfully.

Summary of Contents for MRS-400



































































































































































































Search results

Summary of Contents for MRS-400

Reviews:

Related manuals for MRS-400

Brands by name

Popular brands

INFODRAW MRS-400, User Manual

Search results

Summary of Contents for MRS-400

Reviews:

Related manuals for MRS-400

Brands by name

Popular brands