July 14, 2013
INFODRAW MRS-400 User Manual v5.4.1
39
3-2-2 Initial Configuration of the MRS Device
1.
After installing the drivers, activating the device and connecting a USB cable. If the
instillation was conducted properly, the settings of the MRS device configurator
should be illuminated and the log on the bottom-left side of the program should read
"
Parameters Loaded
".
2.
Enable the "
Remote Server
" and type in the IP address of your server.
3.
Click on the candle icon to save the changes you have made. Wait until the log in the
bottom-left reads "
Parameters Saved
".
4.
Restart your MRS-400 unit
5.
Install the MRS Monitor-Client, follow the instructions of the MRS monitor-client section
below.
6.
Activate the MRS-400 device.
For further reading go to the
