July 14, 2013
INFODRAW MRS-400 User Manual v5.4.1
192
15)
Q: How do I prevent certain users and devices from accessing my server?
A1:
Open the “MRS Server Windows Service Program” or the “MRS Monitor Server
Application”.
A2:
Enter the “Permissions” feature of the server. In order to be selective in your
permissions, you should disable the “Allow unlisted Devices” option and the “Allow
Unlisted Users” option in the “Default Access Menu”.
A3:
Add users in the “Users” Menu. Add devices in the “Devices” menu.
A4:
Enter the “User Device Access” menu in the permissions feature. Press add, and
enter the details of the user, the device and clearance level you wish to give
them and press “ok”.
16)
Q: What do the different access levels mean?
A1:
Forbidden: The user/device are not allowed to access the server at all.
A2:
Aware: you are able to see the device is online but you can't see video, hear audio or
change any of the settings.
A3:
Passive: The user is allowed to view video and hear audio but can only record on
monitor. The user cannot activate switches, the audio-out function or enable/disable
channels.
A4:
Active: The user is allowed to view, listen, modify video and audio parameters,
record on the device and speak to the device. The user is not allowed to enable and/or
disable channels and a few other advanced options.
A5:
Administrative: The user is allowed to do everything in the system.
17)
Q: I have a camera with PTZ. How do I activate it?
A1:
You must make sure the camera uses a Pelco-D camera engine protocol.
A2:
Open the “MRS Device Configuration” program. Open the “PTZ” tab. Press “add” to
match the video channel with the Camera ID. For example:
Video Channel: 1 and Camera ID: 1.
Set the Baud Rate that you desire in the “Baud Rate” list box. Save changes and restart
the device. The same Camera ID and Baud Rate settings must be set on the PTZ camera
itself. Connect the PTZ camera to the unit through the video input and RS-485 wires.
A3:
Open the MRS monitor program. Click on the relevant video channel. A small
window should open on the bottom-left side of the screen with a yellow ball. Point the
camera to where you want it to move to.
18)
Q: How do I use the SMS feature in the MRS monitor?
A: Double-click on the SMS icon that is in the device tree. In the SMS window, tick the
“enable” box. Enable the events that you want to trigger an SMS. Write down the
message you want to send. Fill in your name and phone number. Click on “add”. Then
click “apply”.
