July 14, 2013
INFODRAW MRS-400 User Manual v5.4.1
143
For ordinary initial setup of the MRS-400 unit, usually you will only need to change the
following parameters in the Device Configurator:
Menu:
Parameter:
Connection Menu
a)
Your server’s
IP address
in the
“Remote Server”
box.
Modem Menu
For Automatic Modem Setup:
a)
Click the
“Automatic”
option under “Modem Configuration”.
The Automatic option supports most cellular provider APN’s
around the world. In most cases this will provide an automatic
connection to the cellular network in use.
Please speak to your local cellular provider and/or Infodraw
dealer for specific network connection requirements.
After inputting the necessary settings
using the Device Configurator application,
the configurations must be saved into the
unit. This is done by
opening the “File”
menu and clicking
“Write to Device” (The
candle icon).
After pressing “Write to
Device”, the status at the
bottom left hand side of the
application will show:
“Parameters Saved”
.
