manualshive.com logo in svg

Inficon 3000 Micro GC, Operating Manual

Share
Download
Inficon 3000 Micro GC Operating Manual Download Page 243

9 - 15

PN

 07

4-

51

9-

P1

C

3000 Micro GC Operating Manual 

9.2.1.3.3  Extra Peaks

Extra (ghost) peaks are peaks that appear during a blank run, and peaks that 
appear during a sample run. Ghost peaks appear even when no sample is injected 
(and are also found among the genuine peaks during a sample run).

Ghost peaks appear during a blank run

The column has been heated and idle for an extended period of time

Carrier gas and plumbing impurities such as oils, greases and other materials. 

Reaction of the stationary phase with trace levels of oxygen, water and other 
materials in the carrier gas.

Contaminated inlet. Residues in the inlet are volatilized or pyrolyzed and swept 
onto the head of the column. If reducing the 

Inlet Temperature

 eliminates or 

reduces ghost peaks, the inlet requires cleaning.

Contaminated sample conditioner. If the sample conditioner contains a filter, 
replace the filter.

Additional peaks appear when pure sample is injected

Sample is not pure, causing ghost peaks. Run a blank (carrier gas only). If the 
peaks persist, they are not sample-related.

Thermal degradation of one or more components by an overheated inlet. 
Reduce the 

Inlet Temperature

.

Sample carryover, causing ghjost peaks. Run time is not adequate for all the 
sample compounds to elute. Compounds carried over appear as broad peaks 
during the second run. This can be eliminated by increasing 

Column 

Temperature

 or increasing sample 

Run Time

. If applicable, adjust 

Backflush 

Time

 until all sample components appear during a run.

Summary of Contents for 3000 Micro GC













































































































































































































































































Reviews:

No comments

Brands by name

Popular brands

Load more brands