manualshive.com logo in svg

Inficon 3000 Micro GC, Operating Manual

Share
Download
Inficon 3000 Micro GC Operating Manual Download Page 23

1 - 5

PN

 07

4-

51

9-

P1

C

3000 Micro GC Operating Manual 

WARNING

3000 Micro GC has inlets which can be heated to 140

°

C. 

Touching the inlets once they are at operating 
temperatures can result in injury. Extreme care should be 
taken to avoid touching the inlets.

WARNING

Do not operate in an explosive environment or in the 
presence of flammable gases or fumes. Operation of any 
electrical instrument in such environments constitutes a 
safety hazard.

WARNING

Use only the INFICON supplied power source. Use of any 
other power supply could result in catastrophic failure of 
the electrical system and may cause personal injury.

WARNING - Risk Of Electric Shock

Always disconnect the power supply before replacing or 
touching any components.

WARNING

Hot surfaces. Many parts of 3000 Micro GC operate at 
temperatures high enough to cause serious burns. These 
parts include, but are not limited to: the inlet port, the 
inlet manifold, the GC module, the column nuts attaching 
the module to an inlet or a vent. Extreme care should be 
taken to avoid touching these heated surfaces. 

WARNING

Do not operate the instrument with the GC module 
disassembled. Column temperatures can reach 180

°

C.

Summary of Contents for 3000 Micro GC













































































































































































































































































Reviews:

No comments

Brands by name

Popular brands

Load more brands