4
• DOK-POWER*-TVD*1.3****-ANW1-EN-E1,44 • 02.97
Table of Contents
3.20. Heat loss inside the control cabinet ...............................................33
3.21. Safety clearance inside the control cabinet ...................................33
3.22. Front view of the TVD 1.3 ..............................................................34
4.
TVD 1.3 Interconnections
35
4.1.
Optional Control Possibilities ......................................................... 35
4.2.
TVD interconnect with DC bus dynamic braking ...........................36
4.3.
TVD interconnect with E-stop relay with DC bus
dynamic braking ............................................................................. 38
4.4.
TVD interconnect without DC bus dynamic braking ...................... 40
4.5.
TVD interconnect for a position-controlled braking of the drives ... 42
5.
Terminal Descriptions
44
5.1.
DC bus short-circuiting ................................................................... 44
5.2.
Power off ........................................................................................44
5.3.
Power on ........................................................................................44
5.4.
Stopping the drives in an E-stop or a power failure ....................... 45
5.5.
Signal Voltages ..............................................................................46
5.6.
"Ready" status ................................................................................46
5.7.
Power OK .......................................................................................48
5.8.
Regenerated power too high .......................................................... 48
5.9.
Temperature Pre-Warning ..............................................................49
5.10. Mains contactor de-energized ........................................................ 49
5.11. Mains contactor energized .............................................................49
6.
Troubleshooting
50
6.1.
Localizing the fault .........................................................................50
6.2.
Diagnostic display .......................................................................... 53
6.3.
Definition of the displays ................................................................54
6.4.
Rating plate data ............................................................................ 57
7.
Dimensional data
58
7.1.
Dimension sheet TDV 1.3 power supply mdule .............................58
