Cheetah Pregius Camera with 10 GigE Vision Interface – User Manual
October 8, 2020
Page
97
of
170
Rev 1.0
ExposureAutoUpperLimit
Sets the maximum exposure time value in microseconds.
GainAutoLowerLimit
Sets the minimum gain when GainAuto is Continuous (step is 0.1
dB).
GainAutoUpperLimit
Sets the maximum gain (up to 48 dB in 0.1 dB steps).
ExposureGainAutoPriority
Selects whether to adjust gain or exposure first.
ExposureGainAutoMode
Shows what luminance mode is used during AGC or AEC.
ExposureGainAutoTarget
Sets the desired luminance level to be maintained during AGC or
AEC or both assuming 12-bits per pixel.
ExposureGainAutoTargetThreshold
Sets the acceptable steady-state error of the luminance
level to be maintained during AGC or AEC. Normal initial
setting for stability is 16.
AverageLuminosity
Shows current average luminosity of the image.
CurrentFrameCounterLow
Shows number of frames captured since the camera power up
(lower 32 bits).
CurrentFrameCounterHigh
Shows number of frames captured since the camera power up
(upper 32-bits).
Exposure Auto PID Coefficients Panel
ExposureAutoPMin
Controls the minimum of the P coefficient for Exposure Auto control
loop.
ExposureAutoPMax
Controls the maximum of the P coefficient for Exposure Auto control
loop.
ExposureAutoExposureForPMax
Maps the maximum of the P coefficient to the value of
exposure in the Exposure Auto control loop.
Gain Auto PID Coefficients Panel
GainAutoPcoef
Controls the P coefficient for Gain Auto control loop.
GainAutoIcoef
Controls the I coefficient for Gain Auto control loop.
GainAutoDcoef
Controls the D coefficient for Gain Auto control loop.
