Cheetah Pregius Camera with 10 GigE Vision Interface – User Manual
October 8, 2020
Page
67
of
170
Rev 1.0
4.
On the
Advanced
tab, set the following parameters:
•
Jumbo Packet
(or
Jumbo Frame
)
→
Set
Value
to
9014 Bytes
(or
9 KB MTU, 9000, 16K
–
depends on NIC).
•
Receive Buffers
(or
Receive Descriptors
)
→
Set to the maximum value possible.
•
Transmit Buffers
→
Set to the maximum value possible.
•
Interrupt Moderation
→
Enable
.
•
Interrupt Moderation Rate
(or
Interrupt Throttling
)
→
Set to
Extreme
.
At higher data rates, the Extreme setting may improve system performance. At lower data rates, a
Low setting is preferred since delayed interrupts cause additional latency.
5.
Click
OK
. The network connectivity may be lost for a couple of seconds.
6.
Reboot your PC to ensure that new settings have been activated.
If
Jumbo Packet
or
Jumbo
Frame
is absent from the
list, your NIC does not
support Jumbo Packets.
Maximum camera
performance cannot be
achieved.
