Cheetah Pregius Camera with 10 GigE Vision Interface – User Manual
October 8, 2020
Page
106
of
170
Rev 1.0
GevSCPSPacketSize
The stream packet size to send on this channel, except for data leader
and data trailer, and the last data packet that might be of smaller size
(since packet size is not necessarily a multiple of block size for stream
channel).
GevHeartbeatTimeout
Indicates the current heartbeat timeout in milliseconds.
GevTimestampTickFrequency
This 64-bit feature indicates the number of timestamp ticks
during 1 second.
GevTimestampControlLatch
Latches current timestamp counter into "Timestamp value"
register.
GevTimestampControlReset
Resets timestamp 64-bit counter to 0.
GevTimestampValue
Reports the latched 64-bit value of the timestamp counter
User Set Controls
UserSetSelector
Points to User Configuration Set (Default, User Set 0…User Set 3) to load
into the camera or save into the camera’s non-volatile memory. Default is
the Factory Default Settings.
UserSetLoad
Loads the User Set specified by UserSetSelector into the camera
workspace (volatile).
UserSetSave
Saves the User Configuration Set 0, 1, 2, or 3 specified by UserSetSelector
to the camera’s non-volatile memory. The Default User Set is read only
and cannot be modified by the user.
UserSetDefault
Points to User Configuration Set, which will be loaded and made active
when the device is reset or after power is applied.
