Imperx Cheetah Pregius SFP-C4440, User Manual – Preliminary

Page: 53 / 170

Cheetah Pregius Camera with 10 GigE Vision Interface – User Manual
October 8, 2020 Page
53 of 170
Rev 1.0
Digital Input / Output Control
Digital Input / Output Control allows you to map camera’s inputs and outputs and configure
strobes.
Parameter Name Type Value Access Description
LineSelector Enumeration
String
Input1
Input2
Output1
Output2
Num.
0
1
2
3
RW Selects the physical line (or pin) of
the external camera connector or
the virtual line of the Transport
Layer to configure.
LineMode Enumeration String
Input
Output
Num.
0
1
RO Returns the status of the physical
line used to input or output a
signal.
LineInverter Boolean RW Controls the inversion of the
signal of the selected input or
output line.
LineStatus Boolean logic 1 – true
logic 0 – false
RO Returns the current signal level on
the selected input or output line.
LineSource
1
Enumeration String
Off
ExposureStart
ExposureEnd
MidExposure
ExposureActive
TriggerActual
TriggerDelayed
PulseGenerator
Strobe1
Strobe2
Num.
0
1
2
3
4
5
6
7
8
9
RW Selects which internal signal to
output on the selected line.
LineSelector must be set to
Output.
LineFormat
2 Enumeration String
NoConnect
TriState
TTL
OptoCoupled
Num.
0
1
2
3
RO Returns the current electrical
format of the selected physical
input or output line.
Strobe1Reference Enumeration String
Exposure
Readout
Trigger
Num.
0
1
2
RW Sets the reference event for
Strobe #1 signal.
Strobe1Enable Enumeration
String
Off
On
Num.
0
1
RW Enables or disables the Strobe #1.
Strobe1Width Integer Min: 1
Max: Depends on
CurrentFrameTime and
Strobe1Delay
RW Sets Strobe #1 pulse duration in
microseconds.
Strobe1Delay Integer Min: 10
Max: Depends on
CurrentFrameTime and
Strobe1Width
RW Sets Strobe #1 delay from the
reference, in microseconds.