Cheetah Pregius Camera with 10 GigE Vision Interface – User Manual
October 8, 2020
Page
21
of
170
Rev 1.0
Camera LED Status Indicator
The camera has a red-green-yellow LED on the back panel of the camera. The following LED
colors and light patterns indicate the camera status and mode of operation:
LED Color
Light Patterns
Status Description
Green steady ON
Normal operation. You should see a normal image coming
out of the camera
Green blinking
Trigger enabled
Amber steady ON
Test mode. You should see one of the test patterns.
Amber blinks at ~0.5 Hz
Camera is in AGC/AEC mode. In this mode, changing the
shutter slider does not affect image luminance
Amber blinks at ~2.0 Hz
Camera receives an external synchronization pulse
Red steady ON
Communications or firmware load error
Red blinks at ~2.0 Hz
Power failure
/
Green / Red blinks at ~1 Hz GigE Vision firmware error
LED Off
No power
Ethernet LED Status Indicators
Two LEDs on the camera’s back panel indicate Ethernet status.
Ethernet Status
Amber LED
Green LED
10 Gbps Link – No Activity
Off
Solid On
10 Gbps Link – Activity
Off
Blinks
5 Gbps Link – No Activity
Solid On
Solid On
5 Gbps Link – Activity
Blinks
Blinks
2.5 Gbps Link – No Activity
Solid On
Off
2.5 Gbps Link – Activity
Blinks
Off
1 Gbps Link – No Activity
Blinks
Off
1 Gbps Link – Activity
Blinks
Off
100 Mbps Link – Activity
Off
Blinks at 1Hz
100 Mbps Link – No Activity
Off
Blinks at 1Hz
10 Mbps Link – Activity
Blinks at 1Hz
Off
10 Mbps Link – No Activity
Blinks at 1Hz
Off
