imagistics ix2700, User Manual

Page: 373 / 398

OPTIONAL ACCESSORIES 23 - 5
Before starting installation
Be careful when handling the Network board. There are many
delicate electronic components that are susceptible to damage from
static electricity. To avoid such damage, use the following
precautions when handling the board.
■
Leave the Network board in its anti-static bag until you are ready
to install it.
■
Make sure that you are adequately grounded before touching the
Network board. Use an anti-static wrist strap and a grounding mat
if possible. If you do not have an anti-static wrist strap, touch the
bare metal surface on the back of the machine before handling
the Network board.
■
Avoid moving around the work area in order to eliminate static
charge build-up.
■
If possible, do not work on a carpeted area.
■
Do not flex the board and do not touch the components on the
card.
Tools Required:
Phillips Screwdriver
Step 1: Hardware installation
WARNING
DO NOT touch the surface of the main boards within 15 minutes after
turning off the power.
1
Disconnect the telephone line cord, turn the machine power
switch off, unplug the machine power cord from the AC outlet,
and then disconnect the interface cable.