imagistics im3510, Operation Manual

Page: 70 / 128

4-6
Misfeed in the transport area, fusing area, and exit area
CAUTION
The fusing unit is hot. Take care in removing paper.
(Do not touch the metal parts.)
1
Unlatch the duplex module and slide it to
the left.
Unlatch the module and
gently move the module
away from the machine.
If the machine is not
equipped with a duplex
module, open the side
cover similarly.
2
Remove the misfed paper as shown in the
illustrations below.
Roller rotating knob A
If paper is misfed in the
transport area, turn roller
rotating knob A in the
direction of the arrow to
remove the misfed paper.
NOTE
Transfer roller
Do not touch or damage
the transfer roller.
Photoconductive drum
Do not touch or damage
the photoconductive
drum.
Roller rotating knob B
If paper is misfed in the
fusing area, turn roller
rotating knob B in the
direction of the arrow to
remove the misfed paper.
CAUTION
The fusing unit is hot. Take care in removing paper.
(Do not touch any metal parts.)
Fusing unit open tab
If the misfed paper is
inside the fusing area,
turn down the fusing unit
open tab to open the
fusing unit and remove
the misfed paper.
If paper is misfed in the
exit area, remove it as
shown while taking care
not to tear the paper.
If the duplex module is
equipped with an exit tray
and paper is misfed in the
exit area, remove the
misfed paper as shown in
the illustration.
3
Gently close the duplex module.
If the machine is not
equipped with a duplex
module, close the side
cover.
After closing, confirm that
the misfeed message
has been cleared and the
normal display appears.
MISFEED REMOVAL