imagistics im3510, Operation Manual

Page: 109 / 128

6-5
6
NOTICE PAGE PRINTING
A notice page will be printed when the current print job cannot be done due to a system limitation and an explanation
of the limitation is too lengthy to be shown in the message display. A notice page will describe the limitation and
other possibilities to run the job.
A notice page will be printed in the following cases.
●
When sufficient memory is not available to store the print data. This may happen even if the amount of data for
the job is not large when the memory becomes full with data of other jobs.
●
When a print job is sent to the printer and the number of print hold jobs has reached the maximum of 100 jobs.
●
When different paper sizes have been selected for printing within a print job and one or more of the sizes
cannot be delivered to the selected exit tray or to the stapler compiler. In these cases printed paper will be
delivered partly to the specified destination (tray or compiler) and partly to another exit tray.
●
When a function has been selected for printing but has been disabled by a key operator program. (Duplex
module is disabled, stapler is disabled, punch is disabled, specified exit tray is disabled, etc.)
●
An invalid account number is entered when the auditing mode has been set.
Disabling of notice page printing
Notice page printing can be disabled using a key operator program. See “Disable notice page printing” on page 7-
11.