Configuration via OSD
Draco tera flex
80
The following parameters can be configured:
Field
Entry
Description
LDAP
Y
LDAP for the request of information from a user administration is
active
N
Function not active (default)
LDAP TLS/SSL
Y
Enable a secured transmission (transport layer security) for the
Active Directory access.
N
Function not active (default)
LDAP Server
Byte
Input of the IP address for the LDAP-Servers in the form
"192.168.1.1" and the LDAP port (Default: 389/636)
LDAP Base DN
Text
Input of the LDAP Base DN according to the existing structure of
the user directory
A matrix configuration should only include one LDAP user and one LDAP group at the same time. The
LDAP user and the LDAP group can be created, changed, or deleted during ongoing operation: no restart
of the matrix is required.
To configure and enable the synchronization to the Active Directory server, there are three steps required:
•
Configuring the LDAP settings.
•
Creating an LDAP User (see page 89).
•
Creating an LDAP Group (see page 94).
To configure the LDAP settings, proceed as follows:
1. Select
System Settings > Network
in the task area.
2. Set the
LDAP
option to
Y
(Yes) within
Network Services
.
3. Optionally set the
LDAP TLS/SSL
option to
Y
(Yes) within
Network Services
.
4. Enter the appropriate IP address and the port number in the field
LDAP Server
(default port number:
389 (636 for SSL)).
5. Enter the
LDAP Base DN
into the appropriate field (e.g., dc=example, dc=com).
6. Click the
Okay
button to confirm the settings.
7. Restart the matrix.
Changes done in step 2 to 7 only come into effect after a restart of the matrix.
8. Create an LDAP User (see page 89).
9. Create an LDAP Group (see page 94).
