Draco tera flex
Configuration via OSD
103
The following parameters can be configured:
Field
Entry
Description
ID
Text
Ident number of the CPU Device
Name
Text
Name of the CPU Device
Member of Switch
Selection
Assign the CPU input to the respective CPU Switch
Switch
Y
Automatically set for a CPU Switch (484 Series)
N
Function not active (default)
Further parameters are described in chapter 7.7.1, page 98.
To configure the CPU Switch for an individual switching of the single inputs, proceed as follows:
1. Select
Configuration > CPU Devices
in the main menu.
2. Click the
New S.
button.
A new CPU Switch will be created.
3. Enter a CPU Switch name into the field
Name
.
4. Assign an EXT Unit to the CPU Switch into the field
EXT assigned
.
5. Click the
New SP.
button.
A new CPU (input) for a CPU Switch will be created (Port 1).
6. Assign the created CPU input to a CPU switch in the field
Member of Switch
.
7. Repeat the steps 5. and 6. for each input port in use at the CPU Switch.
8. Click the
Okay
button.
The CPU Switch is now configured and can be individually switched via OSD.
