Configuration via Management Software
Draco tera flex
226
Deleting Multi-Screen Control
Changes of the Multi-Screen Control are permitted only if the control is switched to the Control CON
Device.
To delete the Multi-Screen Control for a setup, proceed as follows:
1. Switch control to the Control CON Device.
2. Select
Assignment > Multi-Screen Control
in the task area.
3. Click the
Activate Edit Mode
menu item in the toolbar.
4. Select the setup in the list of the working area the Multi-Screen Control should be deleted.
5. Click the
Enable
checkboxes for all CON Devices to remove the checkmarks.
The disabled Control CON Devices are shown as gray screens in the arrangement field and the Multi-
Screen Control is disabled.
6. Click the
Control
checkbox for all CON Devices to remove the checkmarks.
7. Click the
Deactivate Edit Mode
menu item in the toolbar.
Configuring Multi-Head sources for Multi-Screen Control
NOTICE
A Multi-Head configuration for Apple Mac sources is not supported due to limitations of the macOS.
For the use of Multi-Head sources (computer, CPU), an additional configuration of the CPU Devices is
mandatory. The configuration of CPU Devices, which are connected to Single-Head sources (computer,
CPU) is not mandatory.
