Draco tera flex
Operation
263
Switching via Selection List for CPU Devices
The matrix offers the ability to execute KVM switching operations by means of a selection list for CPU
Devices next to the OSD in full screen.
To use the selection list for CPU Devices, proceed as follows:
1. Activate the
Enable CPU Selection List
option in the
Configuration > EXT Units
menu for those
consoles where the selection list for CPU Devices should be available.
2. Start the command mode by entering the Hot Key and press
<o>
to open OSD.
The selection list immediately appears in the preset position of the extender OSD.
Press the
<F8>
key to hide inactive CPU Devices to provide a clearer overview.
3. Press the respective key (see chapter 9.2.1, page 262) to execute the desired switching operation.
To prevent a switching operation and access OSD, press
<F7>
key.
To close the selection list, press
<Esc>
key.
Fig. 199
Example view Selection list CPU Devices
Activating the Automatic Scan Mode for CPU Devices
The matrix offers the ability to use a scan mode based on the favorite list of each CON Device or user.
Scan mode allows the matrix to switch in sequence between the CPU Devices in the favorite list within a
predefined time. All scans are performed in Video Only mode.
To configure the scan mode, refer to chapter 7.8.3, page 109.
To activate the scan mode, proceed as follows:
1. Define a favorite list for the respective CON Device (see chapter 7.8.4, page 112) or users (see
2. Start the command mode by entering the Hot Key and press
<o>
to open OSD.
3. Select one of the CPU Devices in the CPU selection list that are defined in your favorite list.
4. Confirm your selection by pressing the
CPU Scanner
button. The scan will automatically start.
If you have enabled the
Force CPU Scan
option (see chapter 7.8.3, page 109), the scan will automatically
start after switching the respective CON Device to any CPU Device from the favorite list without the need to
press the
CPU Scanner
button.
