Configuration via OSD
Draco tera flex
108
The following parameters can be configured:
Field
Entry
Description
Enable CPU selection
Y
When executing the key sequence for opening the OSD, a
selection list for switching CPU Devices will be displayed in the
center of the monitor. Pressing the
<F7>
key within the
selection list opens the standard OSD.
N
Function not active (default)
Enable connection
info
Y
Enable Extender OSD (default: Y)
N
Function not active
Update connection
info
Y
Update connection changes during fade-in of Extender OSD
(default: Y)
N
Function not active
Display Time [sec]
0 to 999
seconds
Duration of OSD fade-in (default: 10)
Horizontal position
10 Pixels
Horizontal OSD position (default: -2)
Vertical position
10 Pixels
Vertical OSD position (default: 2)
To change the Extender OSD settings, proceed as follows:
1. Select
Configuration > EXT Units
in the main menu.
2. Select the console extender in the
EXT Units
list whose Extender OSD settings has to be adjusted.
3. Click the
Edit
button or press the
<Enter>
key to confirm the selection.
4. Modify the desired settings.
5. Click the
Okay
button to confirm your changes.
