Configuration via OSD
Draco tera flex
130
7.10.2 Saving a Predefined Configuration
In this menu the current matrix configuration can be saved to predefined storage locations in the permanent
memory of the matrix. You have the possibility to save the created configuration within eight storage
locations in the matrix (
File #1
to
File #8
). Additionally, a configuration can also be saved as default
configuration that is loaded each time the matrix is started (see chapter 7.3.1, page 67). However, it does
not replace the buffering of configuration (see chapter 7.10.1, page 129).
The storage location to be overwritten by the current configuration must be selected explicitly.
The current configuration will be saved to this storage location and will be shown immediately in the menu.
The previously saved configuration saved to this storage location is overwritten.
Fig. 99
OSD Menu Configuration - Save as…
Saving position
Name and detailed information
Active
Name and detailed information of the current configuration are shown. This
configuration can be saved (function
Save
, see chapter 7.10.1, page 129).
Default
Name and detailed information of the respective saved configuration are shown.
This storage location can be overwritten.
File #1
to
File #8
Name and detailed information of the respective saved configuration are shown.
These storage locations can be overwritten.
To save the created configuration to a specific memory location, proceed as follows:
1. Select
Configuration > Save As…
in the main menu.
2. Select the required storage location (
File #1
to
File #8
) or
Default
.
The current configuration is saved to this storage location and is shown immediately in the menu. The
previously saved configuration saved to this storage location is deleted.
