Ihse Draco tera flex Cat X 1G K480-C16 User Manual Download Page 283

Page: 283 / 335

Draco tera flex

Operation

283

9.6.4

Extender Firmware Status

The firmware status of the extender modules with its name, type, and version is displayed in this menu.



Select

Status & Updates > Status - Extender Firmware

in the task area to query the current firmware

status of the extender modules.

Fig. 216

Management software menu Status & Updates - Status Extender Firmware - Firmware

The following information is displayed in the working area:

Column

Description

Numerical value of the extender module ID

Name

Name of the EXT Unit and the extender module firmware

Port

Port number of the matrix, the extender module is physically connected

Type

Type of the CON / CPU Unit and firmware

Device

Name of the CON Device / CPU Device the EXT Unit is assigned to

Version

Installed firmware version

Firmware types to be updated or firmware conflicts are highlighted in color:
Extender firmware version conflict

Manual update of EXTMSD / EXTIMSD recommended*

Wrong module (CPU/CON mismatch)

Undefined type

* Updating of EXT*MSD is only required, if explicitly stated within the release notes or advised by the

manufacturer’s technical support. EXT*MSD requires manual update via the Mini-USB service port at the
extender modules.

Summary of Contents for Draco tera flex Cat X 1G K480-C16
















































































































































































































































































































































Search results

Summary of Contents for Draco tera flex Cat X 1G K480-C16

Reviews:

Brands by name

Popular brands

Ihse Draco tera flex Cat X 1G K480-C16, User Manual

Search results

Summary of Contents for Draco tera flex Cat X 1G K480-C16

Reviews:

Brands by name

Popular brands