Operation
Draco tera flex
270
9.3
Switching Operation via Management Software
9.3.1
Extended Switching
Switching operations can only be performed in online mode. That means an active network connection is
required between the matrix and the management software.
You have two options to perform switching operations for the matrix via management software:
Possibility 1
All connected CON Devices and the associated CPU Device connections are shown in columns in the
working area in this menu.
1. Select
Control > Extended Switch
in the task area.
2. Click the
Activate Edit Mode
menu item in the toolbar.
Fig. 204
Management software menu Control - Extended Switch
The following functions are available to perform a switching operation:
Button
Function
Send
Send effected switching operations to the matrix
Reset
Disconnect all existing connections within the matrix
Reload
Reload switching status
To perform a switching operation, proceed as follows:
To set a
KVM connection
between a CON Device and a CPU Device, double-click on the
corresponding selection box within the
Full Access
column and select the requested CPU Device.
