Draco tera flex
Configuration via OSD
107
To change the settings for mouse and keyboard, proceed as follows:
1. Select
Configuration > EXT Units
in the main menu.
2. Select the console extender in the
EXT Units
list whose Extender OSD settings has to be adjusted.
3. Click the
Edit
button or press the
<Enter>
key to confirm the selection.
4. Modify the desired settings.
5. Click the
Okay
button to confirm your changes.
7.8.2
Setting Extender OSD
In this menu the parameters for the Extender OSD can be set. The settings for mouse and keyboard are
console-specific and can be set separately for each console.
When setting the horizontal OSD position, a prefixed minus describes the orientation to the right edge of
the monitor, e.g., -2 means 2 x 10 = 20 pixels to this edge. When setting a vertical position, a prefixed
minus describes the orientation to the bottom edge of the monitor.
If the
Update connection info
function is deactivated, the Extender OSD only appears when switching via
OSD.
Fig. 82
OSD Menu Configuration - EXT Units
