![background image](http://html1.mh-extra.com/html/ifm/o3m-zz1103/o3m-zz1103_instructions-for-setup_3920741044.webp)
O3M area surveillance
44
11 Troubleshooting
11.1 Status LED
The status LED of the BasicDisplay indicates the operating states of the system�
The status LED of the BasicDisplay is synchronised with the status LED of the BasicController� Both
show the same states�
BasicController / 3D sensor: initialisation
250 ms
250 ms
250 ms
250 ms
250 ms
250 ms
250 ms
250 ms
Device error (e.g. CAN bus not connected)
250 ms
250 ms
250 ms
250 ms
250 ms
250 ms
250 ms
250 ms
System runs normally (standard IO module)
1500 ms
500 ms
System runs normally (configured IO module)
1500 ms
50 450 ms
Device incompatible and deactivated
1500 ms
500 ms
Connection establishment (3D sensor not accessible)
150 ms 100 150 ms 100 150 ms 100 150 ms 1100 ms
Calibration active (3D sensor not accessible)
150 ms 100 150 ms 100 150 ms 100 150 ms 1100 ms
Standby (3D sensor not accessible)
150 ms 1850 ms
3D sensor not accessible (N/A, error or timeout)
150 ms 100 150 ms 100 150 ms 100 150 ms 1100 ms
3D sensor available to a limited extent
150 ms 100 150 ms 100 150 ms 100 150 ms 1100 ms
Some reasons for limited availability are indicated by the status LED (calibration, connection
establishment, etc.).