![background image](http://html1.mh-extra.com/html/ifm/o3m-zz1103/o3m-zz1103_instructions-for-setup_3920741051.webp)
51
O3M area surveillance
UK
Problem
Solution
Setting up and
operating several
vehicles and ZZ1103
sets with one
BasicDisplay�
After successful set-up, the ZZ1103 set can be operated without BasicDisplay�
The configuration is saved on the BasicDisplay and can be transferred to other
ZZ1103 sets�
► Complete the set-up (→ "10 Set-up").
► In the BasicDisplay expert settings, set the "Parameter handling" to "Copy
config to I/O module at start-up" (→ "10.1.2 Expert settings").
> The user settings of the BasicDisplay are copied to the BasicController at
start-up�
►
Restart the ZZ1103 set�
►
Disconnect the BasicDisplay from the ZZ1103 set�
NOTE
Damage to the ZZ1103 set possible�
The BasicDisplay may only be disconnected from the ZZ1103 set
when disconnected from power�
►
Disconnect the devices of the ZZ1103 set from the power supply�
►
Disconnect the electrical connections of the BasicDisplay�
> With the configured BasicDisplay, the configuration can be transferred to
other sets at start-up�