![background image](http://html1.mh-extra.com/html/ifm/o3m-zz1103/o3m-zz1103_instructions-for-setup_3920741018.webp)
O3M area surveillance
18
7 Mounting
7.1 Mounting the BasicController
NOTE
The BasicController and the BasicDisplay can be damaged when installed in engines�
►
Install the BasicController and the BasicDisplay in vehicle bodies�
①
①
①
①
►
Mount the BasicController to a suitable surface using
the screw-on points
①
�
Fig� 6: Mounting the BasicController
7.2 Mounting the 3D sensor and illumination unit
From the mounting location of the 3D sensor, the desired area is monitored� The decisive factors are the
field of view and the measuring range of the 3D sensor� The following values apply to the O3M261 3D
sensor and the O3M960 illumination unit included in the set:
3D image
2D image
Field of view
95° x 32°
120° x 90°
Measuring
range
approx� 8 m > 8 m
The 2D image of the 3D sensor covers a larger measuring range than the 3D image�
Fig� 7: 3D field of view of the O3M261 at a height of 1�7 m with an inclination angle of 45°
►
Select the mounting position for the 3D sensor and the illumination unit�
> The supplied 3D sensor is suitable for monitoring very close areas�