![background image](http://html1.mh-extra.com/html/ifm/o3m-zz1103/o3m-zz1103_instructions-for-setup_3920741027.webp)
27
O3M area surveillance
UK
②
2� Connect the connector for the buzzer
(E3M172) to
②
"Block F".
>
The connector (E3M172) is only
required if the buzzer is used�
30
31b
3� Connect the white wire of E3M172 to
terminal 30 of the buzzer�
4� Connect the black wire of E3M172 to
terminal 31b of the buzzer�
Depending on the operating voltage,
use the buzzer for 12 V or 24 V�
③
④ ⑤
5� Remove the M52 nut
③
from the
BasicDisplay�
6� Place the BasicDisplay
⑤
into the
cover with built-in display recess
④
�
> The BasicDisplay is not flush with the
cover�
7� Screw the M52 nut
③
onto the
BasicDisplay until it is hand-tight�
8� Connect the M12 socket of the short
side of the E3M171 CAN adapter
cable to the M12 connector of the
BasicDisplay�