Rascal Super
User Guide
To Part Set
To Home Set
To Full Set
Enter your 4-digit PIN code. Exit time will start. Leave premises
by designated exit route. System will set automatically on
completion of exit time.
Enter your 4-digit code. Press
*
followed by 0. Exit time will start.
Isolated zone LED's will flash. System will Part Set automatically
on completion of Part Set exit time.
Enter your 4-digit PIN code. Press
*
followed by 6. Exit time
will start. Isolated zone LED's will flash. System will Home Set
automatically on completion of Part Set exit time.
*
X X
X
X
X X
X
X
0
To Unset
(No Alarm)
Enter your 4-digit PIN code to Unset system and revert to 'Day'
mode.
X X
X
X
Sounders/Strobe operating. Enter your 4-digit PIN code.
Sounders/Strobe silenced. LED's on for zone activation. Re-enter
4-digit PIN code followed by # to reset the system.
To Reset
(After an Alarm)
Change User PIN
code
*
X X
X
X
6
Enter your 4-digit PIN code. Press
*
then 9, then 1. Enter your NEW
4-digit PIN code.
*
Bell Test
Enter your 4-digit PIN code. Press
*
then 9. System runs
Auto Test. Press
*
on completion to exit Bell Test.
X X
X
X
X X
X
X
LED'S ON FOR ZONE ACTIVATION
#
*
X X
X
X
9
Y Y
Y
Y
*
X X
X
X
9
*
*
X X
X
X
9
Walk Test
Enter your 4-digit PIN code. Press
*
,
then 9,
then 4 to Walk
Test detectors. Press
*
on completion to exit walk test.
1
2
3
4
7
*
5
8
0
6
9
⊕
⊕
#
Rascal Super
1
4
Part No. 320291
