![background image](http://html1.mh-extra.com/html/ifm/o3m-zz1103/o3m-zz1103_instructions-for-setup_3920741042.webp)
O3M area surveillance
42
Zone definition - zones
Zone definition - zones
The width and length of the zones can be set� The left and right
areas of the zone are set separately�
The minimum detection height is set under "min. height". Objects
below the minimum detection height are ignored�
Save the set zone values�
After saving, the system is
restarted and the display is in
the monitoring mode (→ "10.2
Monitoring mode").
Assignment of the function keys
[Back]
Show previous screen
[Next]
Show next screen
[ ]
Set the length and width of the [ ] zone [ ]
Set the length and width of the [ ] zone
[ ]
Set the length and width of the [ ] zone [ ]
Set the length and width of the [ ] zone
[-]
Decrease selected value
[+]
Increase selected value
[ok]
Confirm input
[Yes]
Save input
[No]
Don’t save input
Assignment of the navigation keys
[▲]
Select the previous menu item
[▼]
Select next menu item
[◄]
Show previous screen
[►]
Show next screen
Zone definition - transfer of values
The values are transferred to the 3D sensor� Then the 3D sensor is restarted�
The 3D sensor is not available during this restart�
If the buzzer beeps after restarting the 3D sensor:
► Press the 4 function keys simultaneously (→ "9 Operating and display elements").
► In the expert settings of the I/O module, set the volume of the acoustic warning signal to "Off" (→
"10.1.2 Expert settings").