IEI Technology IMB-Q870-i2 User Manual Download Page 103

Page: 103 / 223

IMB-Q870-i2 microATX Motherboard

Page 87

S3 (Suspend to

RAM)

The caches are flushed and the CPU is powered

off. Power to the RAM is maintained. The

computer returns slower to a working state, but

more power is saved.

5.3.2 RTC Wake Settings

The

RTC Wake Settings

menu (

BIOS Menu 4

) configures RTC wake event. The RTC

wake function is supported in ACPI (S3/S4/S5) and APM soft off modes.

Advanced

Wake System with Fixed Time

[Disabled]

Enables or Disables
system wake on alarm
event. When enabled,
system will wake on the
date: hr: min: sec
specified.

----------------------

ÅÆ

: Select Screen

↑

↓

: Select Item

Enter

Select

+ - Change Opt.
F1 General

Help

F2 Previous

Values

F3 Optimized

Defaults

Save & Exit

ESC Exit

BIOS Menu 4: RTC Wake Settings

Wake System with Fixed Time [Disabled]

Use the

Wake System with Fixed Time

option to specify the time the system should be

roused from a suspended state.

Disabled D

EFAULT

The real time clock (RTC) cannot generate a wake

event

Summary of Contents for IMB-Q870-i2
































































































































































































































Search results

Summary of Contents for IMB-Q870-i2

Reviews:

Related manuals for IMB-Q870-i2

Brands by name

Popular brands

IEI Technology IMB-Q870-i2, User Manual

Search results

Summary of Contents for IMB-Q870-i2

Reviews:

Related manuals for IMB-Q870-i2

Brands by name

Popular brands