manualshive.com logo in svg

IEI Technology IMB-Q870-i2, User Manual

Share
Download
IEI Technology IMB-Q870-i2 User Manual Download Page 141

 

 

IMB-Q870-i2 microATX Motherboard 

Page 125

6.1 Available Software Drivers 

 NOTE: 

The content of the CD may vary throughout the life cycle of the product 

and is subject to change without prior notice. Visit the IEI website or 

contact technical support for the latest updates. 

The following drivers can be installed on the system: 

ƒ

 Chipset 

ƒ

 Graphics 

ƒ

 LAN 

ƒ

 USB 

3.0 

ƒ

 Audio 

ƒ

 Intel® 

AMT 

 

Installation instructions are given below. 

6.2 Software Installation 

All the drivers for the IMB-Q870-i2 are on the CD that came with the system. To install the 

drivers, please follow the steps below. 

Step 1: 

Insert the CD into a CD drive connected to the system. 

 NOTE: 

If the installation program doesn't start automatically: 

Click "Start->My Computer->CD Drive->autorun.exe" 

 

Step 2: 

The driver main menu appears (

Figure 6-1

). 

Summary of Contents for IMB-Q870-i2
































































































































































































































Reviews:

No comments

Brands by name

Popular brands

Load more brands