IEI Technology IMB-Q870-i2 User Manual Download Page 159

Page: 159 / 223

IMB-Q870-i2 microATX Motherboard

Page 143

Figure 6-26: Restart the Computer

Step 1:

The confirmation screen offers the option of restarting the computer now or later.

For the settings to take effect, the computer must be restarted. Click

Finish

restart the computer.

Step 0:

6.8 Intel® AMT Driver Installation

The package of the Intel® ME components includes

Intel® Management Engine Interface (Intel® ME Interface)

Intel®

Dynamic

Application

Loader

Intel® Identity Protection Technology (Intel® IPT)

Serial Over LAN (SOL) driver

Intel® Management and Security Status Application

Local Manageability Service (LMS)

To install these Intel® ME components, please do the following.

Step 1:

Access the driver list. (See

Section 6.2

)

Step 2:

Click “

7-iAMT Driver & Utility

”.

Step 3:

Double click the setup file in the

ME_SW

folder.

Summary of Contents for IMB-Q870-i2
































































































































































































































Search results

Summary of Contents for IMB-Q870-i2

Reviews:

Related manuals for IMB-Q870-i2

Brands by name

Popular brands

IEI Technology IMB-Q870-i2, User Manual

Search results

Summary of Contents for IMB-Q870-i2

Reviews:

Related manuals for IMB-Q870-i2

Brands by name

Popular brands