IEI Technology IMB-Q870-i2 User Manual Download Page 189

Page: 189 / 223

IMB-Q870-i2 microATX Motherboard

Page 173

CAUTION:

The setup procedure may include a step to create a factory default

image. It is suggested to configure the system to a factory default

environment before the configuration, including driver and application

installations.

Step 1:

Follow the steps described in

Section C.2.1 ~ Section C.2.3

to setup BIOS,

create partitions and install operating system.

Step 2:

Install the auto recovery utility into the system by double clicking the

Utility/AUTORECOVERY-SETUP.exe

in the One Key Recovery CD. This utility

MUST be installed in the system, otherwise, the system will automatically

restore from the factory default image every ten (10) minutes.

Figure C-22: Auto Recovery Utility

Step 3:

Disable the automatically restart function before creating the factory

default image

. Go to: My Computer

Properties

Advanced. Click the

Settings button of Startup and Recovery. Deselect “Automatically restart”. Click

OK to save the settings and exit. (See Figure C-23)

Summary of Contents for IMB-Q870-i2
































































































































































































































Search results

Summary of Contents for IMB-Q870-i2

Reviews:

Related manuals for IMB-Q870-i2

Brands by name

Popular brands

IEI Technology IMB-Q870-i2, User Manual

Search results

Summary of Contents for IMB-Q870-i2

Reviews:

Related manuals for IMB-Q870-i2

Brands by name

Popular brands