IEI Technology IMB-8550 User Manual Download Page 153

Page: 153 / 166

PCIE-9450

Step 3.

You should then be prompted by a “Create RAID0(Y/N)” confirm box.

Step 4.

Press Y and then some necessary information will be written to the selected

disk drives.

WARNING!

All data previously stored on the member drives of a RAID configuration will

be destroyed during the RAID initialization process. If you use “used” drives

to create a RAID array, make you have moved or backed up your data before

creating a RAID array out of these disk drives.

Step 5.

Next you will be prompted to enter a nickname for the created array.

Upper and lower case alphabetic, numeric, space, and underscore

characters are all applicable for naming an array.

Step 6.

Once an array is successfully created, it will be listed in the list of the

configured arrays.

C-5

Summary of Contents for IMB-8550







































































































































































Search results

Summary of Contents for IMB-8550

Reviews:

Related manuals for IMB-8550

Brands by name

Popular brands

IEI Technology IMB-8550, User Manual

Search results

Summary of Contents for IMB-8550

Reviews:

Related manuals for IMB-8550

Brands by name

Popular brands