IEI Technology IMB-8550 User Manual Download Page 139

Page: 139 / 166

IMB-8550

Step 2.

Locate the ALi installation driver folder within the Utility CD that came with your

motherboard.

Step 3.

Copy files under a sub-directory named “SATA50XX” (taking Windows XP installation

as the example) to the root directory of floppy diskette (labeled driver diskette). The

file names are listed below:

disk1

5283096D.bin

txtsetup.oem

Also copy the OS option directory “win98_me”, “win_nt”, or “win_xp”, and related

driver files in each directory.

Step 4.

Boot from Windows installation CD-ROM (this requires you to set CD-ROM as the 1

Boot Device), when the Windows XP Setup blue screen appears and prompts users to

Press F6 if you need to install third-party SCSI or RAID driver, please press the F6

key.

Step 5.

The setup program will continue, later when the setup program prompts users to

specify additional adapters, please press the S key.

Step 6.

Then the setup program will prompt user to insert the driver diskette. Please insert

the driver diskette your prepared previously, and then press ENTER to continue.

Step 7.

The follow-up window will list out the installation choices, please select ALi

SATA/RAID Controller for Windows XP and press ENTER to continue.

Step 8

The follow-up window will list out the devices to be installed, in which selected ALi

controller(s) should be included.

Step 9

Repeat

step 5

, but select ALi ATA/RAID Controller at

step 7

. If both controllers are

installed, go to next step.

Step 10

If users want to install other devices, please operate at this time. If all devices have

been successfully installed, please go to next step.

5-15

Summary of Contents for IMB-8550







































































































































































Search results

Summary of Contents for IMB-8550

Reviews:

Related manuals for IMB-8550

Brands by name

Popular brands

IEI Technology IMB-8550, User Manual

Search results

Summary of Contents for IMB-8550

Reviews:

Related manuals for IMB-8550

Brands by name

Popular brands