IEI Technology IMB-8550 User Manual Download Page 24

Page: 24 / 166

IMB-8550 User Manual

This chapter provides a functional description of the IMB-8550 motherboard designed for the

integration with communications, transaction terminals, interactive clients, and industrial control

applications. This chapter includes information about main processors, interface connectors,

implementation options, and signal description.

2.1 CPU, Memory, and Intel Chipsets

CPU

The IMB-8550 comes with an mPGA479M socket for Intel Pentium® M or Celeron® M processors

running at the speed up to 2.0GHz. The CPU applied requires active cooling by a heatsink and

cooler. A cooling kit by IEI is available as a separately purchased item. Please refer to

Chapter

for details on the cooling kit.

Shown below are some of the key features of the Intel processors (taking Pentium M as an

example):

High performance and low power consumption.

Enhanced Intel SpeedStep technology for low power consumption.

Large L1/L2 caches; up to 2MB L2 for faster I/O turnarounds.

Advanced branch prediction for faster program execution.

Micro-op fusion for excellent load and store data manipulation.

Intel 855GME chipset, on-chip graphics, and dual display.

The table below provides information on the Intel processors supported on the IMB-8550

motherboard.

Table 2-1 Supported CPUs

Mfg.

Model

Capacity/Speed

Description

Intel

760

Pentium M 2.0GHz

2MB

FSB: 533MHz

Intel

745

Pentium M 1.8GHz

2MB

FSB: 400MHz

Intel

738

Pentium M 1.4GHz

2MB

FSB: 400MHz

Intel

370

Celeron M 1.5GHz

1MB

FSB: 400MHz

2-2

IEI

Technology, Corp.

Summary of Contents for IMB-8550







































































































































































Search results

Summary of Contents for IMB-8550

Reviews:

Related manuals for IMB-8550

Brands by name

Popular brands

IEI Technology IMB-8550, User Manual

Search results

Summary of Contents for IMB-8550

Reviews:

Related manuals for IMB-8550

Brands by name

Popular brands