IEI Technology IMB-8550 User Manual Download Page 87

Page: 87 / 166

IMB-8550

Esc key

Main Menu – Quit and not save changes into CMOS

Status Page Setup Menu and Option Page Setup

Menu -- Exit current page and return to Main Menu

Page Up key

Increase the numeric value or make changes

Page Dn key

Decrease the numeric value or make changes

F1 key

General help, only for Status Page Setup Menu and

Option Page Setup Menu

F2 /F3 key

Change color from total 16 colors. F2 to select color

forward.

F10 key

Save all the CMOS changes, only for Main Menu

Table 4

1 BIOS Function Keys

Getting Help

Press F1 to pop up a small help window that describes the appropriate keys to use and the

possible selections for the highlighted item. To exit the Help Window press <Esc> or the

key

again.

If, after making and saving system changes with Setup, you discover that your computer no longer

is able to boot, the AMI BIOS supports an override to the CMOS settings which reset your system

to its defaults.

The best advice is to only alter settings which you thoroughly understand. To this end, we

strongly recommend that you avoid making any changes to the chipset defaults. These defaults

have been carefully chosen by both AMI and your systems manufacturer to provide the absolute

maximum performance and reliability. Even a seemingly small change to the chipset setup has

the potential for causing you to use the override.

4-3

Summary of Contents for IMB-8550







































































































































































Search results

Summary of Contents for IMB-8550

Reviews:

Related manuals for IMB-8550

Brands by name

Popular brands

IEI Technology IMB-8550, User Manual

Search results

Summary of Contents for IMB-8550

Reviews:

Related manuals for IMB-8550

Brands by name

Popular brands