IEI Technology IMB-8550 User Manual Download Page 65

Page: 65 / 166

IMB-8550

WARNING!

Never run the motherboard without an appropriate heatsink and cooler

that can be ordered from IEI Technology or purchased separately.

Unpacking Precautions

Some components on the IMB-8550 are very sensitive to static electric charges and can be

damaged by a sudden rush of power. To protect it from unintended damage, be sure to follow

these precautions:

Ground yourself to remove any static charge before touching your IMB-8550

motherboard. You can do so by using a grounded wrist strap at all times or by

frequently touching any conducting materials that is connected to the ground.

Handle your motherboard by its edges. Do not touch IC chips, leads or circuitry if not

necessary.

Do not plug or unplug any connector or jumper while the power is on.

Do not place a PCB on top of an anti-static bag. Only the inside of the bag is safe

from static discharge.

3-3

Summary of Contents for IMB-8550







































































































































































Search results

Summary of Contents for IMB-8550

Reviews:

Related manuals for IMB-8550

Brands by name

Popular brands

IEI Technology IMB-8550, User Manual

Search results

Summary of Contents for IMB-8550

Reviews:

Related manuals for IMB-8550

Brands by name

Popular brands