IEI Technology IMB-8550 User Manual Download Page 138

Page: 138 / 166

IMB-8550 User Manual

Select when to reboot for the installation change to take effect. Select an option by clicking the

desired check circle and click Finish to end the installation process.

SATA-ALiRAID Driver

CAUTION!

Because of the inherent limitations by Intel’s ICH4 chipset, the ALi M5283

SATA and RAID controller is implemented as a device that requires you to

provide device driver during the Windows installation process. To

successfully install the device driver, please carefully read the following

instructions.

The ALi driver is especially required if SATA drives are the only hard disk drives in your IMB-8550

system. Otherwise the Windows installation program may fail to locate your hard drives whether

you configure your SATA disk drives into RAID volumes or use them as individual disk drives.

The system BIOS can identify SATA disk drives, but cannot control their operation. The separately

installed driver therefore is necessary.

ALi SATA Controller Driver Installation Steps

- During Windows XP Installation

Step 1.

Enable SATA ROM using the BIOS configuration utility. The SATA ROM option is

provided in the Southbridge chipset menu. The process has been detailed in

Chapter 4

5-14

IEI

Technology, Corp.

Summary of Contents for IMB-8550







































































































































































Search results

Summary of Contents for IMB-8550

Reviews:

Related manuals for IMB-8550

Brands by name

Popular brands

IEI Technology IMB-8550, User Manual

Search results

Summary of Contents for IMB-8550

Reviews:

Related manuals for IMB-8550

Brands by name

Popular brands