IEI Technology IMB-8550 User Manual Download Page 86

Page: 86 / 166

IMB-8550 User Manual

Introduction

This chapter discusses AMI's Setup program built into the ROM BIOS. The Setup program

allows users to modify the basic system configuration. This special information is then stored in

battery-backed RAM so that it retains the Setup information when the power is turned off.

Starting Setup

The AMI BIOS is immediately activated when you first power on the computer. The BIOS reads

the system information contained in the CMOS and begins the process of checking out the system

configuration. When it finishes, the BIOS will seek an operating system on one of the disks and

then launch and turn control over to the operating system.

While the BIOS is in control, the Setup program can be activated in one of two ways:

By pressing <Del> immediately after switching the system on, or

By pressing the <Del> key when the following message appears briefly at the bottom of

the screen during the POST.

Press DEL to enter SETUP.

If the message disappears before you respond and you still wish to enter Setup, restart the system

to try again by turning it OFF then ON or pressing the "RESET" button on the system case. You

may also restart by simultaneously pressing <Ctrl>, <Alt>, and <Delete> keys.

Using Setup

In general, you use the arrow keys to highlight items, press <Enter> to select, use the PageUp and

PageDown keys to change entries, press <F1> for help and press <Esc> to quit. The following

table provides more detail about how to navigate in the Setup program using the keyboard.

Key

Function

Up arrow

Move to previous item

Down arrow

Move to next item

Left arrow

Move to the item on the left hand side

Right arrow

Move to the item on the right hand side

4-2

IEI

Technology, Corp.

4-2

Summary of Contents for IMB-8550







































































































































































Search results

Summary of Contents for IMB-8550

Reviews:

Related manuals for IMB-8550

Brands by name

Popular brands

IEI Technology IMB-8550, User Manual

Search results

Summary of Contents for IMB-8550

Reviews:

Related manuals for IMB-8550

Brands by name

Popular brands