IEI Technology IMB-8550 User Manual Download Page 140

Page: 140 / 166

IMB-8550 User Manual

Step 11.

Press Enter to continue Windows XP setup.

Installation Steps under Existing Windows XP

After Windows XP is started, Windows system will automatically find the newly installed adapter

and prompt user to install its driver. Please follow these steps to install the driver:

Step1.

When the Found New Hardware Wizard windows appear(Mass Storage Controller),

select Install from a list or specify location(Advanced) and click Next to continue.

Step 2.

In the follow-up window, please select "Don't search, I will choose the driver to install",

then click Next to continue.

Step 3.

In the follow-up window, please select SCSI and RAID controllers, and then click Next

to continue.

Step 4

In the follow-up window, click Have Disk..., then insert the driver diskette and type in

the driver location: e.g., a CD-ROM, then click OK to continue.

Step 5.

In the follow-up window, select ALi SATA/RAID Controller, then click Next to continue.

Step 6.

Confirm the follow-up windows and click the Finish button to continue.

Step 7

Please "confirm" the Digital Signature Not Found window when it appears, when

finished, please restart the computer.

Step 8

Repeat step 1, but select ALi ATA/RAID Controller at step 4.

5-16

IEI

Technology, Corp.

Summary of Contents for IMB-8550







































































































































































Search results

Summary of Contents for IMB-8550

Reviews:

Related manuals for IMB-8550

Brands by name

Popular brands

IEI Technology IMB-8550, User Manual

Search results

Summary of Contents for IMB-8550

Reviews:

Related manuals for IMB-8550

Brands by name

Popular brands