IEI Technology IMB-8550 User Manual Download Page 152

Page: 152 / 166

PCIE-9450 User Manual

RAID BIOS Setup Menu:

The Serial ATA RAID volume may be configured using the RAID Configuration utility stored

within the ALi RAID controller ROM. The BIOS configuration screen is divided into three

major functional areas: Main Functional Menu, Drive Selection Menu, and a list for the

configured RAID arrays.

2. RAID

Options:

2.1 Create RAID0 Striping for Performance

Step 1.

To create a RAID0 array, use your arrow keys to highlight and press Enter to

activate this item. An ‘S’ flashing character will appear at the Drive

Selection Menu where you can choose the member drives to be included in

the RAID0 array.

Step 2.

Use the Space key to select members of the RAID0 RAID configuration.

The flashing cursor should change to a lower case ‘s’ character once any of

the connected disk drives has been selected. Follow the same method to

select another member drive.

C-4

IEI

Technology, Corp.

C-4

Summary of Contents for IMB-8550







































































































































































Search results

Summary of Contents for IMB-8550

Reviews:

Related manuals for IMB-8550

Brands by name

Popular brands

IEI Technology IMB-8550, User Manual

Search results

Summary of Contents for IMB-8550

Reviews:

Related manuals for IMB-8550

Brands by name

Popular brands