IEI Technology IMB-8550 User Manual Download Page 18

Page: 18 / 166

IMB-8550 User Manual

Core frequency:

Display core frequency of 133MHz

Render core frequency of 133MHz

Compliant with DVI Specification 1.0

Floppy disk drive

interface

Supports up to two floppy disk drives, 5.25”(360KB and 1.2MB)
and/or 3.5” (720KB, 1.44MB, and 2.88MB)

Serial ports

6 (six) RS-232 ports with 16C550 UART (or compatible) with
16-byte FIFO buffer. Support up to 115.2Kbps. Ports can be
individually configured to COM1 to COM6 respectively.

Peripherals

1 (one) parallel port supporting Normal/EPP/ECP mode

- Provides one 26 Pin Printer port header.

- Supports EPP and ECP.

1 (one) VGA port.

1 (one) LVDS via 20-pin connector,

6 (six) USB 2.0/1.1 ports (bracket x 4, pin header (2x5) x 2 via

adapter cable)

6 (six) RS-232 COM ports (one D-SUB on the real panel)

2 (two) PS/2 keyboard / Mouse port.

2 (two) SATA -150 ports.

1 (one) IrDA header supports IrDAs version 1.0 SIR protocol with

maximum baud rate up to 115.2K bps.

1 (one) Digital IO header: provides one 10Pin header for four GPI

and four GPO.

1 (one) CFII Compact Flash socket

2 (two) IDE ports

1 (one) Floppy drive connector

1 (one) GbE Ethernet RJ-45 connector

1 (one) SPDIF output

2 (two) internal fan connectors

NOTE:

There is one I/O bracket included in kit.

1-6

IEI

Technology, Corp.

Summary of Contents for IMB-8550







































































































































































Search results

Summary of Contents for IMB-8550

Reviews:

Related manuals for IMB-8550

Brands by name

Popular brands

IEI Technology IMB-8550, User Manual

Search results

Summary of Contents for IMB-8550

Reviews:

Related manuals for IMB-8550

Brands by name

Popular brands