IEI Technology IMB-8550 User Manual Download Page 91

Page: 91 / 166

IMB-8550

CPU Configuration

This menu contains items shown in the CPU-related information window that are automatically
detected by BIOS.

Max CPUID Value Limit

This item should be disabled for Windows XP.

Configuration options: [Disabled] [Enabled]

Intel SpeedStep™ Technology [Maximum Speed]

If set to “Automatic” here in the BIOS configuration utility, you can make use of the Power

saving feature in your operating system. If set to “Maximum” or “Disabled,” the Enhanced Intel

SpeedStep Technology (EIST) feature will be disabled in your OS. The EIST feature allows

CPU to step down on its internal frequency when the workload is light.

Configuration options: [Maximum] [Disabled] [Automatic] [Minimum]

4-7

Summary of Contents for IMB-8550







































































































































































Search results

Summary of Contents for IMB-8550

Reviews:

Related manuals for IMB-8550

Brands by name

Popular brands

IEI Technology IMB-8550, User Manual

Search results

Summary of Contents for IMB-8550

Reviews:

Related manuals for IMB-8550

Brands by name

Popular brands