IEI Technology IMB-8550 User Manual Download Page 76

Page: 76 / 166

IMB-8550 User Manual

Cooling Kit (CF-518) Installation

Figure 3

9 IEI CF-518 Cooling Kit

IEI provides a cooling kit designed for socket 479 CPU. The cooling kit is comprised of a CPU

heatsink, and a cooling fan.

NOTE:

The CF-518 heatsink comes with a sprayed layer of thermal paste. Make

sure you do not accidentally wipe away the thermal paste while unpacking

or installing the heatsink. Thermal paste between the CPU and the heatsink

is important for optimum heat dissipation.

Installation Steps:

Step 1.

Place the heatsink onto the CPU. Make sure that the CPU cable can be properly

routed when the heatsink is installed.

Step 2.

Align the heatsink so that its four (4) threaded screw fasteners can pass through the

through holes on PCB.

Step 3.

From the other side of PCB, align the provided nut caps to the heatsink’s screw

threads that come through the PCB holes.

3-14

IEI

Technology, Corp.

Summary of Contents for IMB-8550







































































































































































Search results

Summary of Contents for IMB-8550

Reviews:

Related manuals for IMB-8550

Brands by name

Popular brands

IEI Technology IMB-8550, User Manual

Search results

Summary of Contents for IMB-8550

Reviews:

Related manuals for IMB-8550

Brands by name

Popular brands