IEI Technology IMB-8550 User Manual Download Page 112

Page: 112 / 166

IMB-8550 User Manual

Boot Settings Configuration

Quick Boot [Enabled]

Enabling this item allows BIOS to skip some power on self tests (POST) while booting to
decrease the time needed to boot the system. When set to [Disabled], BIOS performs all the
POST items.
Configuration options: [Disabled] [Enabled]

Boot From LAN Support [Enabled]

Disable/Enable Boot from LAN support
Configuration options: [Disabled] [Enabled]

OnBoard SATA ROM [Disabled]

This allows you to enable or disable the onboard SATA connectivity.
Configuration options: [Disabled] [Enabled]

Quiet Boot [Disabled]

This allows you to enable or disable the full screen logo display feature.
Configuration options: [Disabled] [Enabled]

4-28

IEI

Technology, Corp.

4-28

Summary of Contents for IMB-8550







































































































































































Search results

Summary of Contents for IMB-8550

Reviews:

Related manuals for IMB-8550

Brands by name

Popular brands

IEI Technology IMB-8550, User Manual

Search results

Summary of Contents for IMB-8550

Reviews:

Related manuals for IMB-8550

Brands by name

Popular brands