IEI Technology IMB-8550, User Manual

Page: 73 / 166

IMB-8550
3.3 Installation
CPU Installation
WARNING!
1. Please note that the installation instructions described in this manual
should be carefully followed in order to avoid damage to the board
components.
2. Static-free installation environment: The IMB-8550 must be installed in a
static-free environment to minimize the possibility of electrostatic
discharge (ESD) damage. Use of an anti-static work pad or a grounded
anti-static wrist strap is strongly recommended. To avoid damaging the
board components due to static electricity, never place your board
directly on a surface that is not static-free, e.g., a carpet.
3. Always hold components by the edges and do not touch the ICs and
connector pins.
4. Do not remove a component from its anti-static bag before installation.
5. Before you proceed with the installation process, check the CPU surface
and check for bent pins on the socket.
6. While installing the CPU, do not use force, serious damage to the CPU or
CPU socket might occur.
To install Intel 479-pin CPU onto your motherboard, follow the steps below:
Step 1. Check if the retention screw on your CPU socket (mPGA479M) is turned to the unlock
position. The CPU socket should arrive in the unlock condition; however, it is better
you check the retention screw before you proceed with the rest of the procedure.
The CPU installation process requires a flathead screwdriver to complete.
3-11
3-11