IDTECK Star FINGER006, User Manual

Page: 40 / 51

40
12.4.1 FIRMWARE VERSION
12.4.2 MEMORY TEST
12.4.3 OUTPUT TEST
1. F/W VERSION
V A.1.0
The version of the firmware installed in the FINGER006 is
displayed on the LCD.
2. MEMORY TEST
Memory Test allows you to test the memory of the
FINGER006. To begin the test, press
<ENT> . If the test is
successful, the LCD will display the “TEST PASSED”
message. Press any key to finish the test. If the test is
unsuccessful, the LCD will display the “TEST FAILED”
message. Press any key to finish the test and try again. If the
problem persists, please contact your local IDTECK dealer for
assistance or service.
TEST FAILED!!!
PRESS ANY KEY…