IDTECK Star FINGER006, User Manual

Page: 12 / 51

12
Door Relay(NO) NO(1) White with Red Stripe
Alarm Relay(COM) COM(2) White
Alarm Relay(NC) NC(2) Purple with White Stripe
Alarm Relay(NO) NO(2) Purple
INPUT
(CON4)
Exit Button EXIT Orange
Door Sensor CONTACT Yellow with Red Stripe
Aux Input 1 IN1(OK input-Reader Mode) Green
Aux Input 2 IN2(Error input-Reader Mode) Green with White Stripe
EXTERNAL READER PORT (CON5)
Wiegand Data0 DATA0 Pink
Wiegand Data1 DATA1 Cyan
OUTPUT
(CON5)
TTL Output1 TTL1/D0 Orange with White
TTL Output2 TTL2/D1 Brown with White Stripe
OK Signal Out OK Out (Not Use) Green with Red Stripe
Error Signal Out Error Out (Not Use) Blue with Red Stripe
Tamper Switch Out Tamper Switch Out (Not Use) Yellow with White Stripe
RS232 INTERFACE (CON2)
RS232-TX TXD Black with White Stripe
RS232-RX RXD Red with White Stripe
Ground GND Black
RS422 INTERFACE (CON3)
RS422-TX(-) TX(-) Yellow
RS422-TX(+) TX(+) Gray
RS422-RX(-) RX(-) Blue
RS422-RX(+) RX(+) Brown
TCP/IP Communication (CON6)
TCP/IP Communication 8PIN connector module
6.3 Option
6.3.1 TCP/IP Module
The Finger006 is able to use TCP/IP Communication. An optional TCP/IP module is needed for
TCP/IP communication to the PC.